MYOVIEW Kit, Powder for solution for injection Ref.[10234] Active ingredients: Technetium ⁹⁹ᵐTc tetrofosmin

Source: FDA, National Drug Code (US)  Revision Year: 2017 

Product description

11.1 Chemical Characteristics

MYOVIEW 30 mL is a kit for the preparation of technetium Tc99m tetrofosmin injection for intravenous use. Technetium Tc99m tetrofosmin is a radioactive diagnostic agent. Each multiple-dose 30 mL glass vial contains a sterile, non-pyrogenic, lyophilized powder of 1.38 mg tetrofosmin [6,9-bis(2-ethoxyethyl)-3,12-dioxa-6,9-diphosphatetradecane], 0.09 mg stannous chloride dihydrate, (minimum stannous tin 0.015 mg; total stannous and stannic tin 0.0522 mg) 1.92 mg disodium sulphosalicylate, 3 mg sodium D-gluconate, and 11 mg sodium hydrogen carbonate, and 3 mg ascorbic acid. The lyophilized powder is sealed under a nitrogen atmosphere with a rubber closure. The product contains no antimicrobial preservative.

The chemical formula of tetrofosmin is C18H40O4P2with the following structural formula:

When sterile, pyrogen-free sodium pertechnetate Tc99m in isotonic saline is added to the vial, a Tc99m complex of tetrofosmin is formed. The reconstituted product is a clear solution and the pH is in the range of 7.5-9.0.

11.2 Physical Characteristics

Technetium Tc99m decays by isomeric transition with a physical half-life of 6 hours. Photons that are useful for imaging studies are listed in Table 2.

Table 2. Principal radiation emission data – technetium Tc99m:

Radiation Mean % disintegration Mean energy
(keV)
Gamma 2 88.5 140.5

11.3 External Radiation

The air-kerma-rate (exposure-rate) constant for technetium Tc99m is 5.23 m²∙pGy∙(MBq)–1∙s–1 [0.795 cm²∙R∙(mCi)–1∙h–1].

A range of values for the relative radiation attenuation by various thicknesses of Pb shielding is shown in Table 3. For example, the use of 3mm thick Pb will decrease the external radiation exposure by a factor of approximately 1000.

Table 3. Radiation attenuation by lead shielding:

Shield thickness (Pb) mm Factor of attenuation
0.25 0.5
1 10-1
2 10-2
3 10-3
4 10-4
5 10-5

To correct for physical decay of this radionuclide, the fractions that remain at selected intervals relative to the time of calibration are shown in Table 4.

Table 4. Physical decay chart – Tc99m half-life 6 hours:

Hours Fraction Remaining Hours Fraction Remaining
0* 1.000 7 0.446
1 0.891 8 0.397
2 0.794 9 0.354
3 0.707 10 0.315
4 0.630 11 0.281
5 0.562 12 0.250
6 0.500 24 0.063

* Calibration time (time of preparation)

Dosage Forms and Strengths

Kit for the preparation of technetium Tc99m tetrofosmin injection: 30 mL multiple-dose, clear, glass vial with a white sterile, non-pyrogenic, lyophilized powder of 1.38 mg tetrofosmin, 0.09 mg stannous chloride dihydrate, 1.92 mg disodium sulphosalicylate, 3 mg sodium D-gluconate, 11 mg sodium hydrogen carbonate, and 3 mg ascorbic acid.

Following reconstitution with the Tc99m eluate, MYOVIEW is a clear solution not exceeding 2960 MBq/mL (80 mCi/mL) of Tc99m.

How Supplied

Five (5) multiple-dose kits, each containing a 30 mL glass vial with a sterile, non-pyrogenic, lyophilized powder containing 1.38 mg tetrofosmin, 0.09 stannous chloride dihydrate, 1.92 mg disodium sulphosalicylate, 3 mg sodium D-gluconate, 11 mg sodium hydrogen carbonate and 3 mg ascorbic acid.

NDC 17156-026-30

The radionuclide is not part of the kit. Before reconstitution and radiolabeling with Tc99m, the contents of the kit are not radioactive.

Drugs

Drug Countries
MYOVIEW Austria, Cyprus, Estonia, Spain, France, Hong Kong, Ireland, Japan, Lithuania, Malta, Singapore, United Kingdom, United States

© All content on this website, including data entry, data processing, decision support tools, "RxReasoner" logo and graphics, is the intellectual property of RxReasoner and is protected by copyright laws. Unauthorized reproduction or distribution of any part of this content without explicit written permission from RxReasoner is strictly prohibited. Any third-party content used on this site is acknowledged and utilized under fair use principles.